

How to remove epoxy AB glue, what are the removal methods?
I. 5 Methods to Remove Epoxy Adhesive
1. Hairdryer hot air method
Operation: Set the hair dryer to the hottest setting and blow back and forth about 10 centimeters away from the glue, gently prying with your fingernail or a plastic spatula while blowing. Blow for about 3-5 minutes, the glue will be softened and can be torn off!
Tip: plastic, rubber and other materials afraid of heat do not use this trick, easy to deform! If it is metal or ceramics, blow until hot and then pry more easily ~
2. Acetone / Nail Polish Remover Dissolution
Operation: Dip a cotton swab in nail polish remover (containing acetone), apply it on the glue, and wait 5 minutes for it to soften. Then gently brush with an old toothbrush, and the glue will flake off like snowflakes!
Tip: Nail polish remover can be a bit irritating to the skin, so remember to wear gloves while handling. If it’s stuck on clothes, place a towel underneath first to prevent it from seeping through to the other side.
3. White vinegar + alcohol mixture
Recipe: Mix white vinegar and white wine in a 2:1 ratio and put it into a spray bottle.
Usage: Spray the mixture onto the glue, cover it with plastic wrap, and let it sit for 15 minutes. Once the glue softens, gently scrub with steel wool or a stiff nylon brush, then rinse thoroughly with clean water. This method is especially suitable for glue stains on tiles and glass~
4. Freezing and embrittlement
Operation: Put the item with glue into the freezer compartment of the refrigerator, take it out after freezing for 2 hours. At this time, the glue will become as brittle as ice and can be easily peeled off with a fingernail!
Applicable scenarios: This method can be used for clothes, plastic toys, phone cases, and other items that are not afraid of freezing. But for materials like wood and leather, don't try it as they are prone to cracking.
5. Specialized glue remover
Choice: Buy a bottle of "Epoxy AB Glue Specialized Remover," and make sure the ingredients include methyl methacrylate.
Usage: Drop the adhesive remover onto the glue, gently scrape with a small spatula, and apply a few more drops on stubborn areas. Remember to wear a mask, as this stuff has a strong smell~
II. Removing glue according to different scenarios
1. How to remove epoxy AB glue from the skin?
Just glued: Quickly scrub with soapy water, scrape with your fingernails while scrubbing, and it can be cleaned within 5 minutes.
Cured: Soak your hands in warm water for 5 minutes, wait for the glue to soften, then apply olive oil and rub slowly. Finally, wipe with alcohol. If there is still residue, apply nail polish remover and rinse.
2. How to remove epoxy resin AB glue stuck on clothes?
Step 1: Put the clothes in the freezer for 1 hour, then gently scrape off large chunks of glue with a blade once frozen hard.
Step 2: Pour alcohol on the residue, brush back and forth with a toothbrush, then put it into the washing machine for a normal wash.
Step 3: If there are still stains, use a cotton swab dipped in banana oil (available at chemical stores) to apply, then rinse with clean water.
3. Glue on furniture and floors
Wooden furniture: Dab a cotton ball with white vinegar and apply it on the glue. After 10 minutes, wipe it off with a soft cloth, and finally apply a layer of furniture wax for protection.
Metal surface: Soak a cotton ball in acetone and apply for 10 minutes. After the glue softens, gently brush with a wire brush.