Model Comparison: 6018AB vs 583AB
| Item | 6018AB (Medium Soft) | 583AB (Hard Rigid) |
|---|
| Mix Ratio (by weight) | A:B = 100:33 (≈ 3:1) | A:B = 100:50 (≈ 2:1) |
| Cured Hardness | Medium soft, flexible | Shore D > 75 (Hard rigid) |
| Working Time (25℃, 100g) | ~30 minutes | ~25 minutes |
| Full Cure Time | 24-26h @ Room Temp / 4h @ 60℃ | 6-8h @ Room Temp / 80min @ 60℃ |
| Yellowing Resistance | Good for indoor use | Good for indoor use |
| Best Application | Flexible 3D stickers, labels, luminous character coating | Relief crafts, rigid badges, nameplates, hard decorative items |
Performance Positioning
Recommended for indoor use only. For long-term outdoor applications, please choose our PU doming resin series.
![]()
This Epoxy Resin Series
Duration: <1 Year Outdoor
Level: Indoor Recommended
Use: 3D Stickers & Indoor Crafts
Best budget choice for indoor doming | ![]()
Standard 3:1 PU Resin
Duration: 2 Years Outdoor
Level: Mid-term Outdoor
Use: General Outdoor Stickers
Upgrade option for outdoor use | ![]()
Premium 1:1 PU Resin
Duration: 5+ Years Outdoor
Level: Long-term Outdoor
Use: High-end Outdoor Decals
Top grade for heavy outdoor use |
Core Advantages
![]()
Dual Formula for All Scenarios
Soft formula fits flexible sticker bending, hard formula fits relief and rigid products. Covers 3D doming, surface coating and craft casting demands. | ![]()
High Crystal Transparency
Colorless clear liquid, high gloss smooth surface after curing, perfectly restores pattern details, creates full and stereoscopic 3D doming effect. |
![]()
Excellent Self-Leveling & Defoaming
Optimized flow formula, natural leveling without manual scraping, automatic bubble removal, less pinholes and ripples, high yield rate in mass production. | ![]()
Excellent Electrical Insulation
Withstand voltage up to 22KV/mm, high volume resistivity, waterproof and moisture-proof, suitable for luminous characters and electronic components coating. |
![]()
Fast Cure Option Available
583AB hard formula cures in 6-8 hours at room temperature, greatly improves production efficiency, suitable for fast-turnaround relief craft orders. | ![]()
High Cost-Effectiveness
Lower raw material cost than PU resin, stable batch quality, ideal for large volume production of indoor promotional labels and craft gifts. |
Full Technical Specifications
Physical Properties Before Curing
| Test Item | HS6018A / HS6018B (3:1 Soft) | HS583A / HS583B (2:1 Hard) |
|---|
| Appearance | Colorless transparent liquid | Transparent liquid |
| Viscosity (25℃, Part A) | 2000 - 2500 cps | 1500 - 2000 cps |
| Viscosity (25℃, Part B) | 150 - 200 cps | 200 - 250 cps |
| Mix Ratio by Weight | A:B = 100:33 (≈ 3:1) | A:B = 100:50 (≈ 2:1) |
| Working Time (25℃, 100g) | ~30 minutes | ~25 minutes |
| Shelf Life (25℃, Sealed) | 6 months | 6 months |
| Resin Base | Oil-based, 100% solids, solvent-free | Oil-based, 100% solids, solvent-free |
Properties After Full Curing
| Test Item | 6018AB (3:1 Soft) | HS583AB (2:1 Hard) |
|---|
| Hardness | Medium soft, flexible | Shore D > 75 |
| Withstand Voltage | 22 KV/mm | 22 KV/mm |
| Volume Resistivity | 1 × 10¹⁵ Ω·cm | 1 × 10¹⁵ Ω·cm |
| Surface Resistivity | - | 5 × 10¹⁵ Ω/sq |
| Bending Strength | - | 28 Kg/mm² |
| Dielectric Constant (1KHZ) | 3.7 | - |
| Dielectric Loss (1KHZ) | 0.42 | - |
| Water Absorption (24h) | < 0.1 % | - |
| Surface curing | 10-12h @ 25℃ / 2h @ 60℃ | 3-4h @ 25℃ / 40min @ 60℃ |
Application Scenarios
![Epoxy AB resin for 3D domed stickers, high clear bubble-free dome coating]()
3D Sticker & Label Doming | ![Epoxy AB glue for advertising lighted signs, hard clear coating, anti-whitening & waterproof]()
Resin Luminous Letters |
| epoxy resin for 3D logo stickers, self-leveling glossy dome, waterproof and scratch resistant. | Epoxy AB glue for advertising lighted signs, hard clear coating, anti-whitening & waterproof |
![Epoxy AB resin for 3D embossed stickers, thick doming, pinhole-free high fullness]()
3D embossed stickers | ![Epoxy AB doming resin for metal nameplates, high clarity, abrasion resistant for industrial labels]()
Domed Nameplate |
| Thick pour epoxy for embossed domed stickers, rigid cured dome, wear-resistant and non-deformable. | Hard epoxy doming for metal nameplates, protects printed patterns, high gloss smooth surface. |
Standard Operation Process
| 🟢 Keep the substrate dry and clean, free of dust, oil and moisture before dispensing. |
| 🟢 Check Part A first, stir Part A thoroughly if there is any sediment at the bottom. |
| 🟢 Weigh A and B strictly according to corresponding weight ratio (not volume ratio), stir fully and evenly. |
| 🟢 Dispense glue promptly after mixing, use up all mixed glue within the specified working time. |
| 🟢 Glue will penetrate into gaps gradually, secondary dispensing is available if needed. |
| 🟢 Keep the environment clean during curing, prevent dust and impurities from falling on the surface. |
| 🟢 Wait for full curing before packaging or further processing. |
Package & Factory Advantages
Standard Package
✅ 1kg / 5kg small trial set (A+B matched per ratio)
✅ 20kg standard bulk drum set
✅ 200kg industrial drum for large volume orders
✅ Custom package size and formula available
✅ Sealed packaging, leakage-proof for sea shipping
✅ Private label OEM service supported | Why Choose Our Factory
✅ 10+ years professional epoxy resin manufacturer
✅ Complete product range: soft / hard / fast-cure options
✅ Strict QC for every batch, stable quality consistency
✅ Support formula customization: ratio, hardness, curing speed
✅ Adequate stock, 3-7 working days fast delivery
✅ Full export documents: MSDS, TDS, COA provided |
Storage & Safety Notes
![]() Store tightly sealed at 25℃, relative humidity <70%, away from direct sunlight. | ![]() Part B is hygroscopic and will deteriorate when absorbing moisture, seal immediately after use. |
![]() Mixed glue will release heat during curing, the more mixed amount, the faster curing speed. | ![]() Control single mixing amount to avoid rapid heat generation and shortened working time. |
![]() Do not use mixed glue after the specified working time expires. | ![]() Wear protective gloves and goggles during operation, avoid skin and eye contact. |
Frequently Asked Questions
Q: Which model should I choose for 3D stickers vs relief crafts?
A: Choose HS6018AB (3:1 medium soft) for flexible 3D stickers and labels that need bending. Choose HS583AB (2:1 hard) for relief crafts, rigid badges and nameplates that require high hardness and scratch resistance.
Q: Can this epoxy doming glue be used outdoors?
A: It is recommended for indoor use only. Long-term outdoor exposure will cause gradual yellowing. For outdoor projects, we recommend our PU doming resin series with 2-5 years anti-yellowing performance.
Q: What is the exact mix ratio of the two models?
A: HS6018AB is A:B = 100:33 by weight (≈ 3:1); HS583AB is A:B = 100:50 by weight (≈ 2:1). Please weigh strictly by weight, not by volume, to ensure proper curing.
Q: What is your MOQ and can I get free samples?
A: MOQ for wholesale is 100kg. Free samples (1000g per model) are available, customer only needs to pay for international shipping cost.
Q: Do you provide MSDS and other export documents?
A: Yes, we provide full set of documents including MSDS, TDS, COA for customs clearance and international transportation.
Get Samples for Test
Store tightly sealed at 25℃, relative humidity <70%, away from direct sunlight.
